Description

True   60″ TSSU Series Mega Top Dual Sided Sandwich/Salad Prep Table w/ Refrigerated Base, 115v

The entire cabinet structure and solid doors of the True TSSU-60-24M-B-DS-ST-HC mega-top prep table are insulated with foamed-in-place polyurethane insulation. It is equipped with 24 sixth-size food pans in the countertop prep area, but it can also accommodate 6-inch-deep food pans, which are not included with the unit.

The True TSSU-60-24M-B-DS-ST-HC sandwich and salad prep table is NSF/ANSI Standard 7 compliant for open food product and has an NSF-approved interior with a clear-coated aluminum liner, as well as a stainless steel floor with coved corners for quick cleanup. Inside the doors, the magnetic gaskets with a one-piece construction can be removed without tools. Its stem castors are 5 inches in diameter, and locks are provided on the front set to lock the unit in place. This dual-sided unit has a 36-inch work surface height and is equipped with a polyethylene cutting board that runs the length of the unit for food preparation.

Operating in reverse for 20 seconds upon the unit’s compressor start up, the condensing fan motor helps keep the condensing coil clean. When used in addition to routine maintenance, this feature rids the coil of dirt, dust, and debris. By keeping the condensing coil clean, the unit cools product more efficiently and uses a reduced amount of energy.

Product Details

• Full-length, 11³⁄₄-in.-deep cutting boards made of polyethylene on both sides of the unit
• Countertop pan opening design fits various pan sizes and configurations with available pan divider bars
• Comes with a standard 24 sixth-size clear polycarbonate food pans in countertop prep area
• Pan temperatures kept cool by stainless steel, foam-insulated lids that lock freshness in, minimize condensation, and are removable for cleanup
• Top compartment can also accommodate 6-in.-deep food pans (food pans sold separately)
• Exterior is constructed of stainless steel with a GalFan-coated steel back
• Cabinet interior matches stainless steel exterior with clear aluminum liner
• Interior has a clear-coated aluminum liner and stainless steel floor with coved corners
• Entire cabinet structure and solid doors insulated with foamed-in-place polyurethane to retain temperatures
• Positive seal, self-closing doors swing within cabinet dimensions and have a 90-degree, stay-open feature to assist with loading product
• Magnetic door gaskets with 1-piece construction are removable without tools
• Permanently attached, 12-in.-long recessed handle on each door with foamed-in-place sheet metal interlock
• Stem castors are 5 in. diameter and equipped with locks on front set
• Castors create a 36-in. work surface height
• Shelves adjustable in ¹⁄₂-in. increments
• 4 adjustable wire shelves are PVC coated, with 4 chrome-plated clips per shelf

Self-contained Refrigeration System

• Forced-air design holds product temperature in food pans and cabinet interior
• Temperature holding range: 33-41 degrees F
• Corrosion potential eliminated with epoxy-coated evaporator
• Slide-out condensing unit access in back of cabinet for maintenance
• Factory engineered, self-contained capillary tube system uses R290 hydrocarbon refrigerant, which is environmentally friendly
• Energy efficient refrigeration system with guided airflow provides balanced temperature in cabinet interior and food pans
• Fan motor operates in reverse to blow dust off the condensing coil
• Sealed, self-lubricating evaporator fan motor and larger fan blades produce more efficient low-velocity, high-volume airflow

Dimensions & Utilities

• Shelves: 27¹⁄₂ in. L x 16 in. D
• Overall: 60⁷⁄₈ in. W x 46⁵⁄₈ in. D x 37⁵⁄₈ in. H
• 6.5 A, ¹⁄₃ HP
• 115 V/60 Hz/1 ph, 7-ft. cord with a NEMA 5-15P plug