True   27″ One Section Commercial Combo Refrigerator Freezer – Right Hinge Solid Door, Dual Temp, 115v

The True T-19F-FLX-HC one-section reach-in refrigerator freezer flaunts a sturdy stainless steel front with anodized aluminum ends and a corrosion-resistant GalFan-coated steel back. For enhanced durability, the frame rail is constructed of welded, black powder-coated steel. Its interior and shelf-pilasters are lined with clear-coated aluminum, while the floor is made of stainless steel; the corners of this floor are coved to minimize bacterial build-up and streamline cleaning. This interior accommodates three PVC-coated wire shelves that measure 22⁷/₈ inches long by 18¹⁄₄ inches deep. Each shelf comes with four chrome-plated shelf clips that enable users to raise or lower the shelves in ¹⁄₂-inch increments. These shelves are illuminated by integral LED lighting, providing users with a clear view of stored products. The base of the unit is attached to (4) 2¹⁄₂-inch castors, two of which have locks for stability during operation. Overall, this unit measures 27 inches wide by 25¹/₈ inches deep by 78¹⁄₂ inches high.

This T-Series refrigerator/freezer is built with one stainless steel door that flaunts an aluminum interior liner; the liner is clear coated to match the cabinet interior. To minimize temperature fluctuations, the door is self-closing and fitted with a single-piece magnetic door gasket that can be removed for cleaning. Staff can simply open and close the door using the 12-inch-long recessed door handle that’s secured with foamed-in-place sheet metal. Users can engage the standard door lock to protect stored products from tampering and thievery after hours.

To ease cleaning and reduce reaching, the True T-19F-FLX-HC refrigerator/freezer features a bottom-mounted refrigeration system. It’s designed with a network of capillary tubes that evenly distribute temperatures between -10 and 38 degrees Fahrenheit; staff can monitor these temperatures using the external thermostat. High-density foamed-in-place insulation maintains generated temperatures for extended periods to conserve energy. Great for storing frozen or chilled products in bulk, this unit is equipped with a simple toggle switch that enables users to change the configuration from refrigerator to freezer with ease. The electronically commutated condenser and evaporator fans move air at high speeds, while the rear airflow guards facilitate unobstructed air circulation. For optimal corrosion resistance, the evaporator is coated with epoxy, and when the unit is in freezer mode, a time-initiated and time-terminated defrost cycle automatically reduces frost buildup.

Product Details

• Featured in the T-Series
• 1 section
• Ideal for holding (3) 22⁷/₈ in. x 18¹⁄₄ in. PVC-coated wire shelves
• Each shelf includes 4 chrome-plated shelf clips for ¹⁄₂-in. adjustments
• Stainless steel front
• Anodized aluminum ends
• GalFan-coated steel back resists corrosion
• Clear-coated aluminum liner and shelf pilasters
• Stainless steel floor with coved corners
• Dense, foamed-in-place polyurethane insulation
• Welded, black powder-coated steel frame rail
• Stainless steel door with clear aluminum interior liner
• Positive seal, self-closing mechanism
• Standard door lock
• 12-in.-long recessed door handle attached with foamed-in-place sheet metal
• 1-piece magnetic door gaskets
• Exterior thermostat
• LED interior lighting
• Frame rail attached to (4) 2¹⁄₂-in. castors (2 locking)

Refrigeration System

• Bottom mounted
• Self-contained capillary tube system
• R290 hydrocarbon refrigerant
• Toggle switch converts from refrigerator to freezer
• Temperature range: -10 to 38 degrees F
• Rear airflow guards
• Epoxy-coated evaporator resists corrosion
• Electronically commutated evaporator and condenser fans
• Time-initiated and time-terminated automatic defrost cycle

Dimensions and Utilities

• 27 in. W x 25¹/₈ in. D x 78¹⁄₂ in. H
• 3.7 A, ¹/₂ HP
• 115 V/60 Hz/1 ph, with 10-ft. cord and NEMA 5-15P plug